Sparks behind the waveguide cover, a hum with no heat, or a unit that keeps running after you open the door: one call to Acdc Appliance Repair connects you with a licensed, insured independent microwave pro near Berkeley who works on over-the-range, built-in and drawer models.
The cabinet hides a high-voltage capacitor that can store a deadly charge even when the unit is unplugged. That single part is the reason microwave repair should go to a trained pro, not to a weekend project.
Acdc Appliance Repair is a free referral service. Our dispatchers listen to the symptom, then route the call to an independent local pro who handles microwave electronics and mounting work.
Each pro we connect you with runs an independent shop with the license and insurance local rules call for. Asking for proof on arrival is perfectly normal.
A magnetron or control board for a built-in can be a real expense. The technician writes the quote before any work starts, so you can compare it to a replacement unit and decide.
We look for a pro already working near Berkeley. A same-day slot opens up regularly when local pros have breathing room, and the arrival window gets set while you are on the line.
The right pro arrives with an insulated capacitor discharge tool, a meter for testing the diode and transformer windings, the tech sheet for your model, and a survey meter to confirm no leakage once the repair is done.
These cover the over-the-range, built-in wall, drawer and convection combo models that are worth repairing. Each starts with a safe capacitor discharge before any testing.
The fan spins, the light glows, the plate turns, and the coffee comes out cold. The usual suspects are the magnetron, the high-voltage diode, the capacitor, or the transformer. The technician tests each one with the power off and the capacitor discharged.
Blue flashes along the side wall usually come from a greasy or burnt waveguide cover, chipped cavity paint, or a damaged rack support on a convection model. Left alone, arcing can pit the cavity and ruin the magnetron.
Microwaves use a chain of door interlock switches plus a monitor switch. When a switch sticks, the monitor switch shorts the line on purpose and blows the line fuse, so the whole unit goes dark. A unit that runs with the door open needs to be unplugged right away.
When keys stop responding or the oven refuses to shut off at zero, the touchpad membrane or a welded relay on the control board is usually behind it. The pro tests the keypad matrix and the relays first so the right part gets ordered.
An over-the-range microwave also works as the range hood. Grinding fans, a lamp that never turns on, greasy metal filters, and a spent charcoal filter on recirculating installs all get handled here.
A plate that will not spin usually needs a turntable motor or a new coupler. OTR units that sag or rattle may have a loose wall bracket or top bolts pulled through the cabinet, which is a safety issue with a hot stove below.
Use this as a quick read before you call. Share what you see with the dispatcher, and the technician can bring the most likely parts.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Runs, light on, no heat | Magnetron, diode, capacitor or transformer failure | Each high-voltage part with the capacitor discharged |
| Completely dead, no display | Blown line fuse from a failed door switch | Fuse, interlock switches, monitor switch |
| Sparks or smoke inside | Burnt waveguide cover, chipped cavity paint | Cover, cavity surface, stirrer, rack supports |
| Keeps running at zero or with door open | Welded relay or failed interlock | Control board relays and door switch chain |
| Plate will not turn | Turntable motor or coupler | Motor continuity, coupler, roller ring |
| Vent fan loud or dead | Fan motor bearings, greasy filters | Fan motor, damper, grease and charcoal filters |
Most pros will be honest that a small countertop unit is cheaper to replace than repair. Over-the-range, built-in, drawer and convection combo models are different: they are pricier, they are sized to a cabinet opening or wall plate, and replacing one can mean new trim, new brackets and reworked ductwork.
Leave the cabinet closed and pick up the phone. The dispatch line is answered around the clock.
Tell the dispatcher what type of microwave you have, whether it sits over the range, in a wall, or in a drawer, and what it is doing. If you can, read off the model number from the tag inside the door frame.
We route the job to an independent pro near Berkeley and give you the arrival window on the call. When the schedule cooperates, a technician often arrives the day you call.
The technician unplugs the unit, discharges the capacitor with an insulated tool, and tests the high-voltage parts, door switches and control board. OTR models may need to come off the wall plate for access. You get a written, upfront quote before work starts.
After the repair, the pro heats a cup of water to confirm output and, after any high-voltage work, sweeps the door seal with a microwave survey meter to check for leakage. Written coverage for parts and labor is the norm among the pros we connect; ask for it.
The OTR unit died with no display at all. The pro found the line fuse blown and a failed interlock switch behind it. He replaced the switch and the fuse together and explained that a fuse alone would have popped again within a week.
Our wall-mounted microwave ran with no heat. Replacing it meant matching a trim kit, so I asked about repair. She tested the high-voltage parts, swapped the magnetron, and ran a leakage check with a survey meter before packing up.
Sparks were jumping off the side wall every time I warmed soup. It was a burnt waveguide cover soaked with grease. Quick fix, and he showed me how to keep that cover clean.
The drawer microwave kept running even at zero, which scared us. The technician diagnosed a stuck relay on the control board, ordered the exact board, and installed it on a return visit.
A microwave that runs without heating has a fault in its high-voltage section: magnetron, diode, capacitor or transformer. Because that circuit can hold a deadly charge, the testing belongs with a pro who knows how to discharge it safely.
Not until someone looks at it. Arcing tends to start at a greasy waveguide cover or a bare spot in the cavity paint, and it can take out the magnetron if it keeps happening. If it smokes, leave the door shut and unplug it if the cord is within safe reach.
A totally dark microwave often has a blown line fuse. The fuse usually blows because a door interlock switch failed and the monitor switch shorted the circuit on purpose. Replacing only the fuse is not enough; the technician tests the whole switch chain.
Often, yes. OTR, built-in and drawer models cost more and are sized to your cabinets, so replacing them can mean new brackets, trim and vent work. Countertop units are usually cheaper to replace. The technician gives you a written quote so you can compare.
Please do not. The high-voltage capacitor can hold a lethal charge long after the unit is unplugged, and a slip with a screwdriver can be fatal. Leave the cabinet closed and let a trained pro use an insulated discharge tool.
You should request it after any magnetron, door or high-voltage repair. Many technicians run a survey meter around the door edges and vents as a final check that nothing is leaking.
Our line connects homeowners and renters across Berkeley and the surrounding area with independent microwave technicians. Calls go to whoever has a route nearby, and that matters when an over-the-range unit has to be taken down for service.
Someone answers around the clock. Calls after hours are typically scheduled for the first slot next morning, while daytime calls can become same-day visits when a nearby pro has room.
